bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Heartland RV Big Country Fifth Wheel


  • How do I do a Zero Reset on My 6-Point Lippert Hydraulic Leveling System?
  • Thanks so much for the pictures! I went ahead and reached out to my tech at Lippert, and she confirmed that you always want to have the slides in when zero leveling with a 6-point hydraulic leveling system. For the reset process, you will use the LCD OneTouch screen only. In the right hand corner of the screen, there will be a gear or a menu called "more options" or "advanced options." After that selection, that is where you will find the zero-leveling option. You will not have to go through...
    view full answer...

  • Can The Awning Rail Be Installed At Less Than 3" Above The T-Molding?
  • I spoke with Lippert in regards to the Solera RV Slide-Out Awning # LCV000165062 that you're interested in, and they did go onto mention that yes you can install the awning rail at 2-3/4" however there may be a couple of issues to keep your eye out for. Because you'd have it installed below the recommended 3"-6" margin, the awning will have an improper pitch and in turn can lead to water being drained off to the coach wall, as well as a potential for the awning fabric being rolled underneath...
    view full answer...

  • Is It Possible to Turn Furrion Side Camera Observation System into Motion Sensor Camera
  • You'd have to source a 12 volt motion sensor trigger to wire to the power sources of the cameras in the Furrion side marker light kit part # FCE48TASL so that the cameras only have power when the motion sensor is triggered. While we don't carry motion sensor triggers they are pretty easily found online. You'd need one to basically act as a 12 volt relay. So the sensor would be wired to your RV battery directly through a switch like # D16740 and it would complete the power circuit to the...
    view full answer...

  • Can I Use the CAM55025 on a GFI Outlet
  • The Power Grip RV Power Maximizer - 50 Amp Female to 15 Amp Male and 30 Amp Male # CAM55025 is not compatible with a GFI because of the function of the outlet-mainly the lack of a completed uninterrupted ground circuit in the wiring that does not allow it to function correctly. The engineers at Camco have determined that it needs the uninterrupted flow that a GFI outlet cannot provide.
    view full answer...

  • Contents of MORryde Sliding Tray for RV Cargo Compartment MR39FR
  • The MORryde Sliding Tray for RV Cargo Compartment, # MR39FR is a preassembled tray that slides in and out of your RV's cargo compartment. This item comes shipped with multiple hardware options for installation, you choose for what is best applicable for your installation.
    view full answer...